Page
10
Most traditional single coil V8 applications:
•
Connect white Tachometer Input Signal wire to the coil negative terminal
• 4500
RPM switch example with 200 RPM hysteresis, analog input disabled, and tachometer pull-up resistor disabled.
o
Sixteen position Input Signal Pulse Per Revolution switch set to Low Range and 0.5 pulses per revolution (straight
up)
o
RPM #1 programming switch for thousands of RPM (X000) on position 4
o
RPM #1 programming switch for hundreds of RPM (0X00) on position 5
○
Combination of DIP switches 1-3 set hysteresis of 200 RPM
• DIP switch #1 flipped down (OFF)
• DIP switch #2 flipped down (OFF)
• DIP switch #3 flipped up (ON)
○
DIP switch #4 (Analog input activation) flipped down (OFF)
○
DIP switch #5 (Tachometer pull-up resistor activation) flipped down (OFF)
• 4500-
7200 RPM window switch example with 200 RPM hysteresis, analog input disabled, and tachometer pull-up
resistor disabled.
o
Sixteen position Input Signal Pulse Per Revolution switch set to Low Range and 0.5 pulses per revolution (straight
up)
o
RPM #1 programming switch for thousands of RPM (X000) on position 4
o
RPM #1 programming switch for hundreds of RPM (0X00) on position 5
o
RPM #2 programming switch for thousands of RPM (X000) on position 7
o
RPM #2 programming switch for hundreds of RPM (0X00) on position 2
○
Combination of DIP switches 1-3 set hysteresis of 200 RPM
• DIP switch #1 flipped down (OFF)
• DIP switch #2 flipped down (OFF)
• DIP switch #3 flipped up (ON)
○
DIP switch #4 (Analog input activation) flipped down (OFF)
○
DIP switch #5 (Tachometer pull-up resistor activation) flipped down (OFF)
