Linetek 50MTR, Руководство пользователя

Страница: 4 / 4

Port name Description
IHDMI IN /HDMI OUT HDMI signal input/output
CAT6 RJ45 port connect cat6
DC/5V Power adapter socket
EDID
EDID button, press 3 second to copy EDID of display
device,could solve the compatibility problem
30M/60M
push in is lower than 30m, push out is between
30m-50m
LED indicator Description
STA System status indicator
PWR System power indicator
5. Installation
1. EDID, the display device connected to the TX, long press for 3 seconds EDID, status indicator light
flashing, copy is complete(note: if there is no access to display devices, will restore the system default
EDID).
2. Connect one HDMI cable within 5 meters between source device and TX Extender.
3. Connect one HDMI cable wthin 5 meters between sink device and RX Extender.
4. Connect single cat6 cables within 50 meters between TX and RX Extender.
5. Connect 5V power supply to the HDMI TX Extender.
6
、
EDID button use, such as the connection after the launch of the P, S, light, the receiving end of the
indicator light, no display or color, the transmitter power to the HDMI port of the monitor and the
transmitter HDMI port , Press the EDID button until the S light flashes, stop after the restart power, repeat
1-5 steps can be.
6. Diagram