LINET Eleganza 3XC Скачать руководство пользователя | Manualshive

Страница: 47 / 56

background image

47

15.2

Safety Checks

Warning

Incorrect safety checks can cause injuries!



Ensure that safety checks are performed by

seller´s

customer service or

authorised personnel (certified by the manufacturer) only.



Ensure that the safety checks are recorded in the service and maintenance log.

A defective bed can cause injuries!



Have a defective bed repaired immediately.



If the defect cannot be repaired, do not continue to use the bed.

Warning

In accordance with

§6 of the Medical Devices Operator Ordinance, the operator is required to perform a technical

safety check on the critical care bed every 12 months.

The procedure for performing the safety check is stipulated in VDE 0751 or IEC 601.1.

The manufacturer will give a certificate to service organisations in which the manufacturer declares that the

service organisation is qualified to perform maintenance on LINET

®

products.

LINET

®

makes every reasonable effort within research, design and manufacturing of beds to ensure that their

products are fit for purpose and product to the highest level of quality. However LINET

®

can take no responsibility

for any damage caused to the product or harm to patients, staff or other individuals as a result of:



Not following the instructions for use, including warning and caution statements, provided in their user
manuals,



Use of the product for other than its intended purpose as stated in any documentation provided by LINET

®

.

NOTE On request, the manufacturer will provide circuit diagrams, component part lists, descriptions, calibration
instructions etc. for service personnel for the repair of ME equipment designated by the manufacturer as repairably
by service personnel..

«
...
45
46
47
48
49
...
»

Содержание Eleganza 3XC

























































Отзывы:

Нет отзывов

Похожие инструкции для Eleganza 3XC

Бренд: Navman Страницы: 17

Бренд: NARGESA Страницы: 50

Бренд: ICP DAS USA Страницы: 45

Бренд: IDEAL Networks Страницы: 60

Бренд: IceCure Страницы: 104

Бренд: Pari Страницы: 12

Бренд: laerdal Страницы: 2

Бренд: laerdal Страницы: 104

Бренд: laerdal Страницы: 33

Бренд: Lafayette Страницы: 2

Бренд: MacDon Страницы: 46

Бренд: MacDon Страницы: 82

Бренд: Mac Medical Страницы: 2

Бренд: MACDEV Страницы: 8

Mentor Touch ET750

Бренд: MAC TOOLS Страницы: 24

Бренд: MA lighting Страницы: 10

Бренд: Parkside Страницы: 58

Бренд: Quantum Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды