LineEye LE-590TX, Руководство пользователя

Страница: 24 / 27

-22-
4-5.
RFC2544 test
Automatic test is possible by using the DApps-2544 based on the standard of RFC2544.It generates and analyzes
the test packet to evaluate throughput performance, latency, packet loss, and Back-toBack of an Ethernet switch
or router.
It offers the customize report and displays the effective real-time test result.
＜ Setting example ＞
Here is the setting example to transmit the 64 byte packet and the 128 byte packet of layer 2 from the Port A
of LE-590TX via DUT of the measurement target to the Port B with the wire operation rate of 50% to 100%
(10% interval) for 3 seconds and the Port B receives them.
1 : Connect the analyzer with a PC and run the attached software LE590-2544.
2 : Select the “Port Configuration” on the left window and select “Layer2” on the Protocol tab.