LineEye LE-2500XR, Инструкция по эксплуатации

Страница: 44 / 140

-42-
ڦ
Target line
Select the target line from TXD or RXD.
ڦ
Character
Input the data string in HEX by [0]~[F] and [END/
X] keys. To set the bit mask or HDLC frag, touch
“W0”~“W2” or frag mark on the right bottom of
screen.
□ Idle Time
Retrieve idle time which exceeds the set value.
The unit of idle time for retrieval should be the same unit
of idle time when it is measured.
To retrieve the data with timeout, input the timeout time
here.
□ Time Stamp
Retrieve specified time stamps. The setting unit of time
stamp for retrieval should be the same unit of time stamp
when it is measured.
Specifying data with time stamp enables to find data
when communication trouble occurs.
In the right figure, it retrieves the data between 22:46:30 on Feb.
18th and 22:47:00 on Feb. 18th.
Start Retrieval
Touch “ ▼ ”or “ ▲ ”to start retrieval. When find the matched data, it displays data on top of the screen.
“ ▲ ”
：
Retrieve previous (older) data, starting from the top of data displayed on the screen.
“ ▼ ”
：
Retrieve backward (newer) data, starting from the top of data displayed on the screen.
Touch “count” on the right bottom of screen to count data matched with the retrieval conditions. “Not found” is
displayed if there is no matched data.
In the right figure, “W0” should be matched with 30h ~37h, and 2 bytes of frame error code is “x”, and there
is an end frag.