49
50
Configuration
6.16 Default Settings
Click
Default Settings
. Click
Restore
then click
OK
to restore the camera to
factory default settings. The camera will reboot.
6.17 Sensor Configuration
The Sensor Configuration menu is used to adjust camera image settings.
To configure camera image settings using the Sensor Configuration menu:
• Log into the camera using a web browser, and from the Live Video page,
right-click on the video area and select
Sensor Config
.
Right-click in the video area
and select Sensor Config
Configuration
2.
Click
Privilege Manager>User
.
Select the
user
Click Unlock
3.
Under
User
, select the locked user account.
4.
Click
Unlock
to unlock the account.
6.14 Protocol
Protocol contains the following sub-menus:
• Protocol
• Security (Not supported)
NOTE:
Do not check User Verification in the Security sub-menu, as it may
block ONVIF software from detecting the camera.
6.14.1 Protocol
The Protocol page (
Protocol>Protocol
) allows you to view ONVIF protocol
settings.
6.15 Device Restart
Click
Device Restart
. Click
Restart
then click
OK
to restart the camera.