233190 X3 Linear LLC
8
May 2013
Mounting the Cabinet
There are three holes in the back of the eMerge cabinet for mounting it to the
wall, as shown in Figure 3.
Figure 3. Wall mount eMerge cabinet.
The two mounting holes near the top of the cabinet are keyholes and should be
mounted first. The lower hole can then be drilled using the cabinet as a template.
Mounting hardware should be sufficient to hang a 25 pound (11.34 kg) load.
Wall space required to fully open the cabinet doors is twice the width of the
cabinet. The door opens from right to left as you face the cabinet. It is
recommended that the cabinet be mounted in a location where the door can be
fully opened.
