233190 X3 Linear LLC
36
May 2013
Using the Power, Reset, and Revert Buttons on the
eMerge 50P/5000P
This section describes how to use the Power, Reset, and Revert buttons to:
•
Start and shut down the system.
•
Reboot the system if the software is unavailable.
•
Reset the controller network and login factory defaults if you are unable
to log into the system.
Figure 28. Power, Reset, and Revert buttons.
Using the Power Button
When the system is not running, pressing the Power button starts the system. The
system status LED blinks while the system is starting up. You will hear a single
beep when the startup process is complete.
