9
Basic System Testing
Figure 24.
Final Connections and Testing
After the installation is complete, the audio source components will
need to be connected. After connecting the sources, the system
will be ready to power-up.
Audio Source Component Connections
Audio sources can be connected to the source input wall plates
with stereo coax cables, a digital coax cable, or an SPDIF optical
digital cable.
Connect the audio output (analog or digital) of each audio source
1.
component to each of the source input wall plates.
Use the switch on the source input wall plates to select ANALOG,
2.
OPTICAL, or COAX to match the source input used.
Connect an IR emitter to each source input wall plate and affi x the emitter
3.
to the audio source component’s faceplate in the area of the components
IR sensor (the exact position for the IR emitter on the component will
require a little experimentation).
Turn on the audio source components and have them play audio to ready
4.
the system for testing
Connect Power
To ready the system for testing, power must be applied to the
hub(s).
Plug all power supply line cords into the outlets that were installed.
1.
Verify that the
2.
POWER
indicator is lit on each hub installed. There also is
a power indicator inside the power supply that can be seen through the
case vents.
Basic System Testing
After applying power to the system, perform a basic system test at
each keypad to verify that the system was wired correctly and that
all components are functioning.
Go to each keypad and perform these tests:
Press the
1.
POWER
button. The keypad keys should light.
Press the
2.
SOURCE
button to cycle through the sources. Verify that the
source indicators cycle through the source numbers.
Listen for audio from each of the sources. Use the
3.
VOL
up and down
button to adjust the keypad’s volume. Verify the sound quality.
Press the
4.
POWER
button to turn off the keypad.
Refer to the User’s Guide for detailed system operation
instructions.
Audio Source Connections
Figure 22.
A
na
lo
g
O
p
t
i
c
a
l
Co
a
x
A
na
lo
g
O
p
t
i
c
a
l
Co
a
x
A
na
lo
g
O
p
t
i
c
a
l
Co
a
x
ANALO
G
S
TE
R
EO
AUDIO
S
OU
R
CE
COAX DI
G
ITAL
AUDIO
S
OU
R
CE
OPTICAL DI
G
ITAL
AUDIO
S
OU
R
CE
Hub Power Indicator
Figure 23.
HU
B
POWE
R
INDICATO
R