7
dc2052af
DEMO MANUAL DC2052A
LTpowerPlay QUICK START PROCEDURE
Then, click the “W” (PC to RAM) icon to write these
register values to the LTC3880 and the LTC3883. After
finishing this step, you will see the output voltage
will change to 1.5V.
e. You can save the changes into the NVM. In the tool
bar, click “RAM to NVM” button, as following
f. Save the demo board configuration to a (*.proj)
file. Click the Save icon and save the file. Name it
whatever you want.
If the write is successful, you will see the following
message:
