3
dc1593af
DEMO MANUAL DC1593A
HARDWARE SET-UP
Analog Connections
DAC outputs – The four DAC outputs from the LTC2635
are brought out to turrets labeled V
OUTA
through V
OUTD
.
These may be connected to external instruments or other
circuitry.
NOTE: DAC outputs are not in alphabetical order on the
circuit board.
V
REF
– The Ref turret is connected directly to the reference
terminals of the LTC2635. When the integrated reference
is being used, the reference voltage may be monitored
QUICK START PROCEDURE
at this point. An external reference may also be applied
to this turret after changing the setting in the QuikEval
software, to external.
Grounding and Power Connections
Power (V
CC
) – Normally DC1593A is powered by the DC590
controller. V
CC
can be supplied to this turret, however
the power supply on DC590 must be disabled! Refer to
DC590 Quick Start Guide for more details on this mode
of operation.
Grounding – Ground turrets as well as two grounding
strips are provided.
Downloaded from
Downloaded from
Downloaded from