QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1067
EVALUATION BOARD
2
QUICK START PROCEDURE
Connect DC1067 to a DC590 USB Serial Controller
using the supplied 14 conductor ribbon cable. Con-
nect DC590 to host PC with a standard USB A/B ca-
ble. Run the evaluation software supplied with DC590
or downloaded from
http://www.linear.com/software
.
The correct program will be loaded automatically.
Click the COLLECT button to start reading the input
voltage. Details on software features are documented
in the control panel’s help menu.
Tools are available for logging data, changing refer-
ence voltage, changing the number of points in the
strip chart and histogram, and changing the number
of points averaged for the DVM display.
Figure 2.
Software Screenshot
