![Linear Technology LT8390A Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/linear-technology/lt8390a/lt8390a_demo-manual_1922326002.webp)
2
dc2598af
DEMO MANUAL DC2598A
QUICK START PROCEDURE
Figure 1. Test Procedure Setup Drawing For DC2598A
Demonstration circuit 2598A is easy to set up to evaluate
the performance of the LT8390A Follow the procedure
below:
1. With the input power supply off, connect the input
power supply and output load as shown in the test
setup drawing in Figure 1.
2. Connect the EN/UVLO terminal to GND.
3. Make sure that the SSFM jumper is in the correct posi-
tion – either with SSFM turned ON or OFF. Only place
the jumper in the SYNC position if an external SYNC
frequency source is connected to the SYNC pin.
4. Turn the input power supply on and make sure the
voltage is between 4V and 24V for proper steady state
operation.
5. Release the EN/UVLO-to-GND connection.
6. Observe the 12V output voltage, the load current mea-
surement via the ISMON pin voltage and the high effi-
ciency of this small converter.
Downloaded from
Downloaded from