3
dc1371bf
DEMO MANUAL DC1371B
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
Quick start proceDure
To prevent damage to the DC1371, it is important to follow
the equipment setup procedure outlined below:
1. Do not plug the DC1371 into the PC USB port before
running the PScope installation program.
2. Download the PScope installation program from
www.linear.com/designtools/software/
3. Run the PScope installation program and follow the on
screen instructions.
NOTE: The PScope evaluation software requires a PC
running Windows XP or newer, with an available USB
port.
4. Connect the DC1371 to a USB port and supply external
power to the DC1371.
Only use the provided 5V power
supply.
5. The DC1371 should be provided with an ADC demo
board attached.
This demo board should not be re-
moved.
The DC1371 does not supply power to the ADC
demonstration circuit.
6. Each ADC demonstration board also comes with a demo
manual similar to this one and should be referred to
for specific usage details relevant to the demonstration
circuit being evaluated. Please refer to it for proper
jumper settings, input power requirements and input
signal levels and frequency ranges.
7. Apply an appropriate conversion clock and analog input
signal to the ADC demonstration board.
8. The PScope software will automatically find and con-
figure the DC1371 and the connected demo board.
