3
•
Be sure to read the instructions in this section carefully before use.
•
Make sure to observe the instructions in this manual as the conventions of safety
symbols and messages regarded as very important precautions are included.
•
We also recommend you keep this instruction manual handy for future reference.
Safety symbol and message conventions
Safety symbols and messages described below are used in this manual to prevent bodily
injury and property damage which could result from mishandling. Before operating your
product, read this manual first and understand the safety symbols and messages so you are
thoroughly aware of the potential safety.
1. SAFETY PRECAUTIONS
WARNING
Indicates a potentially hazardous situation which, if mishandled,
could result in death or serious personal injury.
CAUTION
Indicates a potentially hazardous situation which, if mishandled,
could result in moderate or minor personal injury, and/or property
damage.
Warning
When installing the unit
•
Do not expose the unit to rain or an environment where it may be splashed by water or
other liquids,as doing so may result in fire or electric shock.
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that
which is specified may result in fire or electric shock.
•
Do not cut, kink, otherwise damage nor modify the power supply cord. In addition,
avoid using the power cord in close proximity to heaters, and never place heavy objects
(including the unit itself) on the power cord, as doing so may result in fire or electric
shock.
•
Be sure to replace the unit’s terminal cover after connection completion. Because high
voltage is applied to the speaker terminals, never touch these terminals to avoid electric
shock.
•
Be sure to ground to the safety ground (earth) terminal to avoid electric shock. Never
ground to a gas pipe as a catastrophic disaster may result.
•
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a
slanted surface. Doing so may result in the unit falling down, causing personal injury and
/ or property damage.
When the unit is in use
• Should the following irregularity be found during use, immediately switch off the power,
disconnect the power supply plug from the AC outlet and contact your nearest dealer.
Make no further attempt to operate the unit in this conditions this may cause fire or
electric shock, ...
- If you detect smoke or a strange smell coming from the unit.
- If water or any metallic object gets into the unit.
- If the unit falls, or the unit case breaks.
- If the power supply cord is damaged (exposure of the core, disconnection, etc)
- If it is malfunctioning (no tone sounds)
