SPECIFICATIONS
2202IQ
RATING
4 OHM
2 OHM
Minimum continuous average power output
per channel both channels driven, from
20HZ to 20KHZ with no more than 0.09%
total harmonic distortion
110
110**
Bridged mono power ratings
(14.4Volts DC operation)
285(8 ohm spkr)
285**(4 ohm spkr)
Frequency Re-1dB
19HZ to 30KHz
Signal to noise ratio
(A-weighted)
95 or greater
Damping factor @ 4 Ohms
210 at all frequencies
Input sensitivity for rated output at
minimum and maximum gain settings
150 mV to 5V
Maximum rated current
38A
50A
Input impedance
50K OHM
Rise time
(Slew rate)
16v/micro Second
Dimensions
3.0"H x 9.5 "W x 9.75"L
** 2-ohm power rating is tested with the power supply taps in the 2-ohm setting,
leaving the taps in the 4 ohm setting will generate considerable additional power
however it is not suggested or recommended.
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
LINEAR POWER™ is a trademark of Linear Power, Inc.
6
™
3 4 5 5 L A N E L L L A N E, P E A R L, M S 3 9 2 0 8 (6 0 1) 9 3 2 – 8 4 7 7
™
.