11
Master dimmer
Channel 1 controls the intensity of the currently projected color when the slider is at the highest
position (255), then the intensity of the output is at the maximum.
Red, green, blue and white color selection
Channels 2, 3,4 and 5 control the intensity ratio of each of the Red, Green, Blue & White LEDs.
1,2,3,4 and 5 channels can be used in combination.
Color macros
Channel 6 selects the required color macro.
Channel 6 has priority over channels 2, 3, 4& 5 .
Channel 1 is used to control the intensity of the current color macro.
Strobe
Channel 7 controls the strobe of channels 1 through 6.
Channel 7 has priority over channels 2, 3, 4 & 5.
Speed of the strobe is adjustable from 0 to 20 Hz.
Module selection
Channel 8 provides individual control of the three LED modules in each fixture.
245 ~255 switch to the 11CH-2 mode.
Auto programs
Chanel 9 selects the preset auto programs 1~50.
When activating the auto programs, then it is possible to control.
the auto speed by using channel 10.
Channel 9 has priority over channels 2-8.
Dimmer speed
Channel 11 is for selecting the dimmer mode and dimmer speed.
When channel 11 is not activated, then RGBW and master dimmer are linear.
The dimmer modes 1, 2, 3 and 4 are different speeds of the nonlinear dimming curves.
Channel
Value
Description
8. Module selection
245~255
Convert to 11CH-2
9. Auto
000~005
No function
006~025
Auto (AT01~50)
10
000~255
Auto speed
11
000~255
Dimmer speed
