Linear Acoustic LQ-1000, Руководство пользователя

Страница: 34 / 46

Linear Acoustic LQ-1000 User Guide Detailed Operation
30
4.1.4 GPI Setup
The LQ-1000 supports four GPI inputs which can be controlled by contact closures via
the rear-panel GPI/O connector or from the front panel F1-F4 keys which operate in par-
allel with external inputs. Once the GPI functions are set and GPI is enabled, additional
changes are not allowed until GPI is disabled.
• GPI Input A-D - Disable, Run/Stop, Apply, Reset, Next Screen. Note that Monitor
Preset selection is not currently in use.
The GPI settings are normalized to A=Run/Stop, B=Reset. C=Apply, and D=Next
Screen.
NOTE: GPI MUST be enabled for the front panel function keys (F1-F4) to operate.
4.1.5 Record Audio to USB
Allows for capture of audio to an installed USB thumb drive. Note that this is currently
intended for factory diagnosis of audio issues and requires a special player for proper re-
production. With instructions from the factory, 6 or 8 channels of input and/or output au-
dio can be captured and emailed to us to assist with troubleshooting.
4.1.6 Time and Date Settings
Allows configuration of the LQ-1000 internal clock for correct time zone, date, and time.
It also allows enabling a Network Time Piece (NTP) service which can automatically con-
nect to a time server and keep time and date synchronized. Depending on the network to
which the LQ-1000 is connected, configuration of the facilities Ethernet router may be
necessary
NOTE: The LQ-1000 has DHCP enabled which means that it will automatically fetch
an IP address from the network. To assign a static IP address, the units MAC
address is provided and the local router can be configured to map the desired
IP address to that unique MAC address.