Linear Acoustic AERO.mobile, Руководство пользователя

Страница: 40 / 50

Linear Acoustic AERO.mobile User Guide Presets and Processing
36
• B1 - B5 AGC Release: 0 - 150, slowest - fastest
-How fast an input signal recovers from a gain change once that signal falls be-
low the set threshold.
• B1 - B5 AGC Thresh(old): -12.00dB - +12.00dB
-The reference point for the attack and release parameters to act on the audio
signal present in that band.
Multiband Limiters
Performs multiband limiting of the signals coming from the multiband compressor.
• B1 - B5 Lim(it) Thresh(old): +12.00dB - 0.00dB
-The point above which limiting action takes place at an Infinity:1 ratio.
• B1 Soft Clip Thresh(old): +12.00dB - 0.00dB
• B2 Soft Clip Thresh(old): +12.00dB - 0.00dB
-The point above which band one (low bass) is very quickly limited, acting
more like a clipper without the artifacts. This helps maintain a “tight” bass
sound.
Multiband EQ
This is the section where each of the processing bands is summed and where overall fre-
quency response can be tailored.
• B1 - B5 Out(put) Mix: -12dB - + 12dB
-Sets the mix level for each band summing all bands back together. These con-
trols are prior to the final look ahead limiter and increasing gain may cause
more final limiting (possibly more than desired)
Final Stage
This final section of the processor is where the final look ahead peak limiter and bass soft
clipper are adjusted. The look ahead limiters are wideband, limited to 6dB of gain reduc-
tion, are extremely fast, and due to their look-ahead nature are virtually transparent even
at full gain reduction. Their purpose is to control peaks that make it through the multiband
section. Adjustable parameters are: