Control panel and functions of the digital display
Temperature control
The temperature setting you require for laminating can vary and can be effected by many different factors, these
include thickness of media, thickness and construction of laminating film, speed of the machine and temperature
and humidity of the room you are working in. For this reason, we do not provide a precise chart detailing the exact
temperature required for operation. Please refer to the guide at the bottom of this page if you need help. Always
use a test print to send through the machine before starting to laminate your work.
The temperature control knob will increase or decrease the set temperature as it is turned and the set temperature
will show on the LCD display. The current temperature of the rollers will also be displayed on the LCD display. The
temperature ranges from 0
o
C-140
o
C. If the temperature reaches 140
o
C, the over heating protection function will
automatically activate to prevent the machine getting any hotter.
Approximate temperature guide
This chart is a rough guide only and should NOT be taken as an exact indication of the settings for your laminating
job. As previously stated, many different factors can effect the temperature and speed required. The supplier does
not accept responsibility for incorrect settings being applied.
Encapsulating
Example film
Approx temperature
Approx speed
75 Micron
100°-110°
0.5 m per min
125 Micron
110°-120°
1.0 m per min (decrease speed for thicker documents
and increase the temperature slightly)
Error messages
Should the LCD display panel show the words
OPN fault or CLS fault, there maybe a problem
with your machine. This very rarely occurs but
if it does contact your supplier immediately and
turn off the power.
Familiarise yourself with the control panel
before commencing operation of the machine
Set Temperature
Current Temperature
