28
DO523S
EN
ASSEMBLY HAND PROTECTION
Place the hand protection (6) straight into the openings in the sliding
carriage (7) and press firmly.
ASSEMBLY FOOD CARRIAGE
Place the hooks at the bottom of the food carriage (7) on the edge in the
foldable carriage (12) and press down the food carriage. Carefully check the
food carriage to make sure it is secured properly.
ASSEMBLY FOOD PUSHER
Place the food pusher (5) on top of the hand protection (6). CAUTION: it
is only safe to remove the food pusher if the food that you wish to slice is
longer than 15 cm. If using the appliance without the food pusher, then
extra care must be taken. Always keep your fingers/thumb well away from
the rotating blade.
ADJUST SLICING THICKNESS
The slicing thickness can be adjusted from 1 to 15 mm. Turn the dial (knob) for adjusting thickness (4), to
the desired gauge. The thickness indicator at the top of the slicer shows the selected thickness.
DISMANTLING BLADE
Turn the screw for fastening the blade (10) clockwise. Adjust the support
platform to the thickest setting so that it is easier to remove the blade. The
blade and the machine casing can be cleaned with a disposable damp cloth.
Take great care: The blade is razor-sharp! Always hold onto it by the screw
used for fastening it.
