30
DO2035SV
EN
5.
The rotating floor brush may be rinsed off under running water. Make sure that it is completely
dry
before using it.
6.
Place the floor brush back into the floor nozzle when it is clean.
7.
Slide the cover closed again to secure the floor brush.
8.
Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can dama
ge the machine or your floor. Always remove the hairs stuck on the brushes.
PROBLEM AND SOLUTION
Problem
Solution
The battery charge indicator will
flash on and off.
· The battery is empty. Charge the machine.
The machine does not start up.
· The battery is empty. Charge the machine.
The machine does not vacuum.
·
The filters are dirty/the dust reservoir is full.
·
The floor nozzle is clogged/the floor brush is blocked.
· Clean the machine as described in this manual.
The running time of the machine is
shorter and shorter.
·
The filters are dirty/the dust reservoir is full.
·
The machine is not sufficiently charged.
Charge the
machine fully and try again.
· The battery is broken or old. Contact the after sales service.
· Stuck hairs. Remove the hairs stuck on the brushes.
SPECIFICATIONS ADAPTOR
Published information
Value and precision
Unit
Linea 2000 BV – Dompel 9 – 2200
Herentals – Belgium
-
-
Model number
DO2035SV
-
Supply voltage
100 - 240
V
Power frequency
50-60
Hz
Output voltage
25.0
V
Output current
0.5
A
Output power
12.5
W
Average active efficiency
86.94
%
Efficiency at low load
73.68
%
Non-loaded energy consumption
0.06
W