15
DO1052DV
www.domo-elektro.be
FR
· Installez la poignée.
16
· Après installation, laissez l’appareil reposer pendant 8 heures avant de le mettre sous tension. Le gaz
réfrigérant pourra ainsi se stabiliser.
· Laissez l’appareil fonctionner durant 24 heures sans alimentation électrique afin que le boîtier puisse
refroidir à la température appropriée.
CHANGEMENT DU SENS D’OUVERTURE DE LA PORTE
La porte du congélateur est réversible. Si vous avez besoin de monter la porte du congélateur dans l’autre
sens, il est recommandé d’appeler votre agent d’entretien agréé pour effectuer cette inversion, ou de
demander à un technicien.
Avant d’inverser le sens d’ouverture de la porte, vous devez vous assurer que l’appareil est débranché et
vide.
1.
Retirez les deux vis situées à l’arrière du couvercle supérieur.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2.
Retirez le couvercle supérieur du congélateur.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Содержание Domo DO1052DV
Страница 77: ...77 DO1052DV www domo elektro be SK ...
Страница 78: ...78 DO1052DV ...
Страница 79: ...79 DO1052DV www domo elektro be ...