Linea 2000 Domo CR010, Инструкция пользователя

Страница: 34 / 40

34
Domo CR010
EN
6. Fasten the top hinge at the place are provided on the right-hand side of the door. Place the door on
the bottom hinge pin. Fasten the top hinge last.
7. Finally, replace the decorative finish of the control and the cover plates.
USE
CONTROL
1
2
4
5
3
1. Button for Super Freeze function
2. On-off button
3. Display
4. Button for raising temperature and setting the Super Freeze time.
5. Button for lowering temperature and setting the Super Freeze time.
1. Super Freeze function
This function allows you to lower the temperature to -24°C for a specific amount of time. Use this function
for freezing fresh food.
Press the button for 3 seconds to start the Super Freeze function. The Super Freeze icon will be displayed.
Set the desired time between 6 and 48 hours. The default setting is 6 hours.
If you have not set the time within 5 seconds, the function will start automatically. If you still want to
adjust the time, you must press the button for the Super Freeze function again.
Once the set time has passed, the thermostat will return to the temperature selected before setting the
Super Freeze function.
In order to turn off the Super Freeze function, press and hold the Super Freeze button for 3 seconds or
adjust the temperature using the buttons for raising/lowering the temperature.
The Super Freeze icon will disappear from the display.
2. On-off button
Press this button for 3 seconds to turn the appliance on or off. A signal will sound.
3. Display
The temperature will appear on the display. The standard temperature is -18°C.
If the door is not opened or if no buttons are pressed for 30 seconds, the display will go into standby
mode. If the door is open, the display will remain on.
If a problem occurs, the display will show an error code. The display will then go into standby mode after
30 seconds.
4 + 5. Buttons for raising/lowering the temperature
These buttons allow you to set the temperature between -16°C and -24°C.