Connect to AC 230V ~50HZ
Note:
1.It is normal that power transformer becomes hot for extended period of operation.
2.Please unplug the power cord if you’re not going to use the product for an extended period of time.
3.Please do not insert the power cord into the mains socket only if all other instruments are well connected
4.To prevent damage to the system never cut off the speaker cables while the unit is ON.
5.In order to protect the tubes please re-switch on the DAC after turned off in two minutes.
Warning:
Please make sure corresponding voltage is the same as required. We are not responsible for
damage caused by misuse of unsuitable voltage.
Precautions:
Connection of the power cord:Connect the speaker cables and signal cables first and then plug the
power cord into the power socket. Before turning on the amplifier please make sure all connections
are right and power supply is stable.
06
Turning ON
Before turning on the DAC please make sure all connections are correct and the power
supply is stable.
1.If you are going to use PC-USB function please install the USB driver program first and the software
is in the Driver disk attached. Please kindly note iOS system does not need to install the driver software.
Method of installation of the driver program:
2.Please connect the computer and the DAC with USB cable and
then turn on the DAC. Find the driver software in the driver CD
and install according to the instruction step by step. If the
program is correctly installed you will find an icon of the driver
program at the lower right hand side of the computer.
3.Open Audio Setup of the computer and choose XMOS Audio 2.0
Output for the Audio output instrument.
4.Turn on the DAC and the power LED will be on. It shines
indicating that the amplifier is working.
5.In 30 seconds the display will show INPUT: USB SR:-----. It
means the DAC functions very well.
6.Or if the power LED is not on please contact with our local agent
or our company.Select the right sound source and you can enjoy
the music you prefer.
7.Open the media player and play music. Choose USB input and
the display will show the sampling rate of the music currently
played.Connect your sound source with digital output (Optical,
RCA Coaxial, BNC Coaxial, AES/EBU, USB) to the DAC and select the corresponding input by buttons on
the front. Then you can enjoy the music with the full system and the display can show the sampling rate of the
music played.
Содержание LM-502CA
Страница 1: ...VACUUM TUBE AUDIO DAC UNIT LM 502CA...