Line Magnetic LM-216IA, Руководство пользователя

Страница: 6 / 16

6
Input voltage level of the amplifier is 230VAC ±5% and please, make sure that your local voltage is the same as indicated
on the rear panel. A too low or too high voltage can cause serious damage to your amplifier. In case you find an improper
voltage, please contact our company responsible for the power supply or your local dealer.
Front panel
Functions descriptions
Volume knob: This volume knob adjusts the output volume of the amplifier sent to the loudspeaker. Volume up to
the right while volume down to the left.
Operation/Mute: Indicate the state of the amplifier. Orange means operation and if turning on it will twinkle for 30
seconds during the time delay. If it is muted the indicator will twinkle too.(Mute from remote control).
IR remote sensor: React according to the orders of the remote. It is essential that there are no obstacles between
the remote control and the sensor.
Triode / Ultralinear: Switch between Triode and Ultralinear operation state.
If you do not use the power delivered by the ultralinear mode, you can select the triode mode for your KT88 tubes.
Selector: Source selection among CD, LINE 1, LINE 2 and LINE 3 inputs.
1
2
3
4
5
5
4 3 2
1
l l l l l