Line Magnetic LM-212PA, Руководство по эксплуатации

Страница: 11 / 16

Speaker connection
WARNING: Make sure that the device is not
plugged into the mains before making any
connections. It is also recommended to turn
off or disconnect all other devices
associated while making connections to the
product.
Never operate the amplifier without having first
connect the loudspeakers. The operation of a
tube amplifier is different from transistor
amplifier; without speakers connected, energy
is dissipated through the transformers of the
amplifier which will damage the product and
reduce it’s useful life.
Check the impedance of your speakers. When
using a pair of speakers, you can use speakers
with an impedance of between 4, 8 and 16
ohms. BE SURE TO USE THE MATCHING
TERMINALS.
1- Unscrew the terminal by hand.
2- Insert the loudspeaker cable (refer to the diagram below).
3- Screw the terminal.
4- Repeat the same operation for the other 3 terminals.
Please notice the polarity of the cable and do not mix up the positive and the negative ends.
Connect the speaker cables with the amplifier after they have been connected to with the speakers.
Make sure that no wires can short the speaker outputs. Make sure that the speaker terminals are tight enough to
ensure a good electrical connection. If the terminal screws are not tight enough, the sound quality may be affected.
Use only dedicated wire to connect the speakers. A section of 1.5 mm² or more is recommended if the cable length is
greater than 3m.
Speaker terminal
Speaker cable or
U-type terminal
l
l
LM-212PA
10