Lindy Test-i Pro 43069, Руководство пользователя

Страница: 5 / 8

User Manual
QuickTest
The Cable Tester Pro’s QuickTest function allows you to test a large number of cables in a short time.
Select QuickTest in the main menu then press ENTER .
Select
Standard Detail to create the pin-to-pin connection to be tested. The ‘Standard’ will be compared to the other
cables and determine whether these cables are good or bad. The ‘Standard’ cable is automatically saved as the
‘Standard Record’.
V = Defined standard
X = Standard needs defining
Once the ‘Standard’ is defined select
QuickTest .
If the cable’s pin-to-pin connectivity matches the standard, the
Cable Tester Pro will show PASS , and ‘beep’ once.
Press the DOWN button to browse the detailed pin-to-pin connection results.
If the cable’s pin-to-pin connectivity
DOES NOT MATCH, the Cable Tester Pro will show FAIL , and ‘beep’ once.
Press the DOWN button to browse the detailed pin-to-pin connection results.
Browse
Select
Browse mode from the main menu to review or delete previous tests. Press ENTER to review test records or
DELETE while displaying the test record.
To review a saved record, select the
Browse function in the main menu. Press the UP or DOWN buttons to select the
desired record and press ENTER to display the test data.
After pressing the
DELETE button, the tester will display two options in the menu: DeleteOne or DeleteAll .
QuickTest
PASS A01 – B01 A02 – B02
A03 – B03 A04 – B04
FAIL A01 – B03 A02 – B06
A03 – B01 A04 – B07
Saved No. 003 ok
DeleteOne
DeleteAll