Management Guide
Page
33
Administrator WEB Server:
the administration port is the
port for accessing the web-based management interface.
The default is port 80.
WEB Server:
the WEB server allows users to construct a
website using the HTML format. To activate the WEB
server, click
YES
to enable. Specify a port number from 1
– 65535.
WEB Folder
is the location where you place your
HTML files.
Note:
1. By default, port 80 is not allowed to be setup as it has
been configured as the port for accessing the web-based
management interface.
2. A website template is provided on the supplied CD. To use
the template, copy the data in the folder on the CD named
WEB Template
. Paste this data into the folder you have
configures as the
WEB Folder
.
To access the WEB Server...
The address for linking the WEB Server is the IP address of
the Personal Server with a colon and then the port number,
e.g. use –
192.168.1.1:8080
when the IP address of the
Personal Server is
192.168.1.1
and the port number of the
WEB server is configured as
8080
)
Note:
For WAN users to gain access to the FTP or WEB server,
you should link the Personal Server to a router with the
appropriate configuration. Please ensure:
1. The NAT functionality in your router is enabled.
2. In the port-mapping settings, the
Internal Host IP
should be configured as the IP address of this Personal
Server and the value of the
Port
should correspond to
the port number of the WEB server or FTP server you
configured.
(e.g. If the IP address of your Personal Server is
10.10.7.251
, the port number of your FTP is configured as
21
and the port for the WEB server is
8888
, then you
should add or modify a port mapping record: set the
internal host IP address to
10.10.7.251
, the port as
21
, and
then add or modify another port mapping record. Set the
internal host IP address as
10.10.7.251
and the port as
8888
).
3. Before allowing the device to communicate with the
internet, we strongly recommend the use of a Firewall to
secure the network.