- 4 -
1. As the BIOS boots, press
F3
to enter the raid bios utility.
2. Select
Create RAID set
. Press
F2
.
3. Select
Create Mirrored set
press
F2
.
4. Press
Y
Select automatic Setup.
5. Press
Y
and then press ESC to exit the setup.
6. Continue with conventional Fdisk and Format steps as if you are installing
a conventional hard drive.
7.Your RAID configuration is complete. Please proceed to software installation
section.
3.3. Creating a Mirrored-Striped Set
1. As the BIOS boots, press
F3
to enter the raid bios utility.
2. Select
Create RAID set
. Press
F2
.
3. Select
Mirrored-Striped set
then press
F3
.
4. Select
Auto config
. Press
A
.
5. Press
Y
and then press ESC to exit the setup.
6. Continue with conventional Fdisk and Format steps as if you are installing
a conventional hard drive.
7.Your RAID configuration is complete. Please proceed to software installation
section.
3.4. Deleting RAID Sets
1. As the BIOS boots, Press
F3
to enter the raid bios utility.
2. Select
Delete RAID set
. Press
F1
.
3. Select
1
click
Y
to remove the RAID set. If the RAID set being deleted is a
Striped set, then all of the data will be lost. If the set being deleted is a
Mirrored set, then the data will remain intact and accessible on both drives.
3.5. Creating a Spare Drive
1. As the BIOS boots, Press
F3
to enter the raid bios utility.
2. Select
Delete RAID set
. Press
F1
.
3. Answer
1
Select
Y
to remove the RAID set. If the RAID set being deleted is
a Striped set, then all of the data will be lost. If the set being deleted is
a Mirrored set, then the data will remain intact and accessible on both
drives.
3.6. Deleting a Spare Drive
To delete a spare drive, use the same procedure as deleting a RAID set.
