User Manual
Output Ports
1. Power Button: Use this button to power on the unit and to leave in standby
2. Input: Press this button repeatedly till your selected source is activated
3. Optical Out: Connect your optical cable from your amplifier or active speaker
4. IR Sensor: Make sure the IR sensor is visible to your IR remote
Power
Connect the 5V PSU to the LINDY Optical switch and to the AC wall outlet
Remote Control
1 2 3 4
Power Button: Press to turn the
device on and then press again
to put the device in standby
Buttons 1-4: Select any of the
buttons for your required input
