2. Software Installation
2.1. Windows 2000 installation
1. Insert the card into an available ExpressCard slot
2. Windows will display the
‘Found New Hardware Wizard’
,
‘Ethernet controller’
.
Click
‘Next’
3. Select
‘Search for a suitable driver for my device (Recommended)’
and click
‘Next’
. Make sure the driver CD is in your CD-ROM/DVD drive
4. Check
‘Specify a location’
, uncheck the other boxes and click
‘Next’
5. Type in
E:\
(If your CD-ROM/DVD is
E
:\)
and click
‘Browse’
6. Specify the driver location,
e.g.
E
:\
10_100_1000NIC\Marvell_Yukon\Windows\WIN2000
and click
‘OPEN’
,
then
‘OK’
7. When the wizard indicates that it has found a driver for the device click
‘Next’
.
Click
‘Finish’
2.2. Windows 2003 Server installation
1. Insert the card into an available ExpressCard slot
2. Windows will display the
‘Found New Hardware Wizard’
,
‘Ethernet controller’
3. Select
‘Install from a list or specific location (Advanced)’
and click
‘Next’
.
Make sure the driver CD is in your CD-ROM/DVD drive.
4. Select
‘Search for the best driver in these locations’
and check
‘Include this
location in the search:’
. Uncheck the other boxes.
5. Type
in
E:\
(If your CD-ROM/DVD is
E
:\)
and click
‘Browse’
6. Specify the driver location,
e.g.
E
:\
10_100_1000NIC\ Marvell_Yukon\Windows\WIN2003
and click
‘OPEN’
,
then
‘OK’
7. When the wizard indicates that it has found a driver for the device click
‘Next’
.
Click
‘Finish’
