- 7 -
2. Select
Create RAID set.
Press
Enter
.
3. Select
JBOD (Single)
then press
Enter
.
4. Select
JBOD Drives
. Press
Ente
r.
5. Select
RAID size
. Press
Ente
r.
6. Press
Y
to save your settings.
3.6. Creating Spare Drive
1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.
2. Select
Create RAID set.
Press
Enter
.
3. Select
Spare Drive
then press
Enter
.
4. Select
Spare Drives
. Press
Ente
r.
5. Select
RAID size
. Press
Ente
r.
6. Press
Y
to save your settings.
3.7. Deleting RAID Sets
1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.
2. Select
Delete RAID set.
Press
Enter
.
3. Answer
Y
to remove the RAID set. If the RAID set being deleted is a Striped set, then all of
the data will be lost. If the set being deleted is a Mirrored set, then the data will remain
intact and accessible on both drives.
3.8. Rebuilding Mirrored Sets (RAID 1)
1. After replacing the failed hard drives boot the BIOS, Press CTRL+S or F4 to enter the
raid bios utility.
2. Select
Rebuild RAID 1 set.
Press
Enter
.
3. Select
Rebuild Hard Drive.
Press
Enter
.
4. Answer
Y
to rebuild the Mirrored set of hard drive.
3.9. Resolving Conflict
When a RAID set is created, the metadata written to the disk includes drive
connection information (Primary and Secondary). If, after a disk failure, the
