Lindy 39374, Руководство пользователя

Страница: 7 / 30

User Manual English
Receiver
Front Panel:
USB QC Connect USB devices. This port also supports Quick Charge.
USB Connect USB devices.
▲USB LED The USB LED will emit a solid orange light when there are no USB devices
detected. When USB devices are detected, the LED will intermittently flash “x”
times depending on how many devices are detected (between 1 and 4).
▲STATUS LED The Status LED shows current links between the transmitter and receiver.
Please see the “Installation & Operation” section of the manual for full details.
EDID The EDID button is used to copy the EDID of each display from each source.
Please see the “Installation & Operation” section of this manual for instruction
on copying EDID’s.
Rear Panel:
RS-232 Connect to a serial control device.
IR IN Connect an IR receiver.
IR OUT Connect an IR transmitter.
TOSLINK OUT Connect a TOSLINK (optical) cable to an amplifier or active speaker system.
HOST Please see the “Installation & Operation” section of this manual for detail.
USB 1 Connect a USB device. Please note: When the “Host” Switch is set to “Host”
this port will only provide power to the USB device.
MINI USB Connect to a PC or Laptop.
USB 2 Connect a USB device.
GROUND Ground connection
POWER Connect an included 12VDC 1.5A multi-country power supply.
EXTEND / SERVICE Extend / Service switch assists in serial control. Please see the “Installation &
Operation” section of this manual for full detail.
CAT IN Connect up to a 100m (328.08ft) Cat.6 (or higher) cable to establish a link
between the transmitter and receiver.
HDMI 1 Connect an HDMI cable to a display or projector
AUDIO OUT Connect a 3.5mm stereo audio cable to an amplifier or speakers.
HDMI 2 Connect an HDMI cable to a display or projector.
MIC IN Connect a 3.5m audio cable to pass-through a microphone input from the
receiver.