User Manual
Command
Description
S SIZE 0
– 6
0=OVERSCAN
1=FULL
2=FOLLOW INPUT
3=PAN SCAN
4=LETTER BOX
5=UNDER 2
6=UNDER 1
R SIZE
Reports the numeric value of SIZE setting as above
S INPUT HDCP 0/1
0 = ON, 1 = OFF
R INPUT HDCP
Apple only. Reports the numeric value of HDCP setting as above
S SYNCSHIFT 0/1
0 = ON, 1 = OFF
R SYNCSHIFT
Reports the numeric value of SYNCSHIFT setting as above
S CONTRAST 0
– 60
Set the numeric value for CONTRAST from 0
– 60
R CONTRAST
Reports the numeric value of CONTRAST setting as above
S BRIGHTNESS 0
– 60
Set the numeric value for BRIGHTNESS from 0
– 60
R BRIGHTNESS
Reports the numeric value of BRIGHTNESS setting as above
S HUE 0
– 60
Set the numeric value for HUE from 0
– 60
R HUE
Reports the numeric value of HUE setting as above
S SATURATION 0
– 60
Set the numeric value for SATURATION from 0
– 60
R SATURATION
Reports the numeric value of SATURATION setting as above
S SHARPNESS 0
– 30
Set the numeric value for SHARPNESS from 0
– 30
R SHARPNESS
Reports the numeric value of SHARPNESS setting as above
S NR 0
– 3
0=OFF, 1=LOW, 2=MIDDLE, 3=HIGH
R NR
Reports the numeric value of NOISE REDUCTION setting as above
S AUDIO VOLUME 0
– 100
Set the numeric value for VOLUME from 0
– 100
R AUDIO VOLUME
Reports the numeric value of VOLUME setting as above
S AUDIO DELAY 0
– 3
0=OFF, 1=40ms, 2=110ms, 3=150ms
R AUDIO DELAY
Reports the numeric value of AUDIO DELAY setting as above
S AUDIO MUTE 0/1
0=ON, 1=OFF
R AUDIO MUTE
Reports the numeric value of AUDIO MUTE setting as above
S HDMI AUDIO 0/1
0=AUTO, 1=EXT
R HDMI AUDIO
Reports the numeric value of HDMI AUDIO setting as above
S KEY LOCK 0/1
0=ENABLE, 1=DISABLE
R KEY LOCK
Reports the numeric value of KEY LOCK setting as above
S FREERUNCOLOR 0/1
0=BLACK, 1=BLUE
R FREERUNCOLOR
Reports the numeric value of FREERUNCOLOR setting as above
S RESET 1
Resets the Switch to default values
PORT 0
– 8
0=LAST MEMORY, 1 = HDMI 1, 2 = HDMI 2, 3 = HDMI 3,
4 = YPbPr, 5=CVIDEO, 6 = PC 1, 7 = PC 2, 8 = PC 3
ST
Checks the Firmware version
VOL +
Raises the volume level (VOLUME * IS SET)
VOL -
Lowers the volume level (VOLUME * IS SET)
QUIT
Exit (Telnet Only)
