User Manual
English
-
command "save"
save x:
Save current route status to Preset x
x = [1-4] (Preset Position x)
Example: save 1
-
command "load"
load x:
Load the route status from Preset x
x = [1-4] (Preset Position x)
Example: load 1
-
command "edid"
edid x:
Select input EDID mode x
x = [0-3] 0: Ultra HD
1: Copy from Output 1
2: Full HD
3: 4K30
Example: edid 0
Other commands have no parameters.
3. TCP/IP Configuration (Telnet Console Only)
ipconfig:
Display the TCP/IP configuration
setip:
Renew the IP address
setmask:
Renew the subnet mask
setgateway:
Renew the default gateway
setdns:
Renew the DNS servers
setdhcp:
Set the DHCP client, enable or disable
Web Control
1. Open a web browser on your computer and enter the default IP address HTTP://192.168.0.3 to
connect to the IPM web.
Note: HTTP proxy is 80
2. Key in the
port numbers in the “input” fields and click “Apply”.
3.
To select all outputs to have the same signal, click on “select” and chose from the drop down.
Содержание 38162
Страница 2: ......
