Lindy 38140, Руководство пользователя, Страница: 3 / 12

Manual English
1
Introduction
Thank you for purchasing the LINDY HDMI Daisy Chain Cat.5e/6 Extender. This extender allows you to
transmit an HDMI video signal to a series of remote displays/projectors up to a distance of up to 150m
between each Transmitter and Receiver/Repeater using high quality Cat.5e/6 solid core cables.
Each HDMI Receiver/Repeater unit features a HDMI output port for local connection of a
display/projector and two RJ45 output ports allowing further Receiver/Repeaters to be cascaded. This
allows a single Transmitter to be used with up to 100 displays/projectors by cascading through multiple
layers.
Please Note: Network components are not required and not allowed in this daisy chain system!
Package Contents
No. 38140:

HDMI Daisy Chain Cat.5e/6 Extender
–
Transmitter unit

5V DC 2A Multi Country Power Supply

User manual
No. 38141:

HDMI Daisy Chain Cat.5e/6 Extender
–
Receiver / Repeater unit

5V DC 2A Multi Country Power Supply

User manual
Features

Supports display resolutions up to 1920x1080

HDMI 1.3 Compliant, HDCP compatible, 3D signals are not supported

Transmission range up to 150m for each segment over Cat.5e cable

Integrated HDMI Splitter on the Receiver/Repeater Unit to connect 1 HDMI Display and 2
cascaded Receivers/Repeaters.

Up to 31 levels (max 100 displays connected) of Receiver/Repeater can be used

Plug & Play Installation: no configuration required

No EDID data pass though function (please refer to the table
in the section “EDID Presets” at the
end of the manual to see the supported video modes)

Supported Audio formats: LPCM 2-channel, 16/20/24 bit depths at 32/44/48 kHz
Overview
No. 38140
– TRANSMITTER UNIT
HDMI IN: to be connected to the HDMI source
(Blu-ray Player, Computer, Set Top Box, Game Console, etc.)
ON LED: Lit when powered via the mains power supply
LINK LED: Lit when a connection to a receiver/repeater unit No.38141 is established
DC 5V: Connect the supplied power supply to this port
Cat.5 Out: Attach to the Cat.5e/6 cable used to connect to the receiver/repeater unit No.38141
No. 38141
– RECEIVER / REPEATER UNIT
HDMI OUT:
to be connected to the HDMI
Monitor / Display / Projector
ON LED: Lit when powered via the mains power
supply