User Manual
English
I/O Setup
1. All settings under I/O Setup can be amended for a single TV Wall Scaler or multiple TV Wall Scalers.
If using multiple Scalers click on ALL IP for each setting which you want to use with all Scalers.
Parameters and default value are as stated in RS-232 command section.
2. Refresh just the I/O page with one click, no other information is refreshed, click Refresh before
adjusting the settings to ensure you have the correct base values.
3. Reset all the settings from the I/O page back to factory defaults.
Image Adjustment
1. Brightness, Contrast, Saturation and Hue can all be amended for each output of a single TV Wall
Scaler or multiple TV Wall Scalers. If using multiple Scalers click on ALL IP for each setting which
you want to use with all Scalers. Parameters and default value are as stated in RS-232 command
section.
2. Refresh just the Image Adjust page with one click, no other information is refreshed, click Refresh
before adjusting the settings to ensure you have the correct base values.
3. Reset all the settings from the Image Adjust page back to factory defaults.
1
2
3
1
3
2
