User Manual
English
Introduction
Thank you for purchasing the LINDY Cat.5 USB KVM Extender Lite. The USB KVM Extender
LITE allows you to control your PC, server or USB KVM switch from a USB keyboard, mouse
and VGA monitor at distances of up to approximately 150 metres (500 feet) away, using low
cost CAT5 or higher cable.
This extender supports USB mouse and keyboard operation only. It
does not support other USB signals!
The USB KVM Extender LITE consists of a Transmitter (Local) unit and a Receiver (Remote)
unit. The Transmitter connects to a computer or USB KVM switch. The Receiver unit is located
at a remote location and connects to a keyboard, monitor and mouse console.
The USB KVM Extender LITE offers all the features of a professional KVM extender. A
workstation can be connected to the Receiver unit allowing the operator to work on his
computer or remotely on the remote computer or KVM switch. Additionally, a local console can
be connected to the Transmitter unit for direct access to the KVM switch. Both local and remote
consoles can access the servers connected to the KVM switch simultaneously, governed by a
short timeout.
Using the USB KVM Extender LITE to remotely access a computer:
Up to 150m
Local Transmitter
Remote Receiver
Local Computer
onsole
Local Console
Remote
Operators PC
Remote C
Features
Provides a convenient and secure method of remotely locating workstations or
servers without compromising convenience and control
Supports USB keyboard/mouse and VGA monitor signals
Dual console operation – control your computer / KVM Switch from both local and
remote locations
Remote Receiver unit features a built-in KVM Switch – allowing control of a local PC
High-resolution video support:
1280 x 1024 @
100m
800 x 600 @ 150m
Adjustable VGA Tuning control to improve video quality
Easy, user-friendly installation – no software required – the unit registers in the
device manager as a USB KVM device
Compatible with all major operating systems with USB support for KVM devices
Package Contents
Local Transmitter unit
Remote Receiver unit
12V DC, 1A Power Adapter (for the Remote Receiver unit)
2 x 2-in-1 KVM cable (USB & VGA)
This
manual
3
