Lindy 20789 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 60

Lindy 20789 Скачать руководство пользователя страница 15

- 15 -

could  be  re-read  after  the  light  disappeared.  Hold
down the trigger to stop the continuous scanning
Test  mode:  Hold  down  the  trigger  to  start  testing
continuous  scanning  the  barcode hold  down  the
trigger again to stop the testing
Each  time  the  trigger  has  been  held  down,  it  only
read once it only could be changed to another    way
through scan mode to exit.

Continuous recognition/Timeout Off
Scan mode and continuous / key clearance model, as
provided  for  the  Timeout  time,  in  the  absence  of  a
successful scan, exit and turn off the light, once again
press the trigger, to restart scanning.
Timeout time setting mode
Scan continuous reading/Timeout Off” bar code
Scan  two  hexadecimal  digits  as  a  time  value  from
appendix A
Scan OFF” bar code from appendix A
Scan Set end” bar code to finish the setting
Timeout setting uses seconds as a unit, for example,
0x40  expresses  one  minute,  Timeout  value  for  the
initial 0xB4, around 3 minutes.

«
...
13
14
15
16
17
...
»

Содержание 20789





























































Отзывы:

Нет отзывов