LINDR Green Line AS-110-US, Руководство пользователя

Страница: 31 / 36

ˇ
31
24. Table of defects:
MALFUNCTION CAUSE REMOVAL
beverage does not flow keg tapped incorrectly check that the keg coupler lever is pushed
down
the keg is not pressurised pressurise the keg
compensator is closed move the compensator lever
beverage cooled
insufficiently
incorrect thermostat setting turn the thermostat knob
to the right towards number 7
poor air circulation check the cleanliness of condenser plates
device overheats place the device in a colder environment
tap jerks, drink sprays out pressure too high reduce delivery medium supply, reduce
pressure in the
keg
beer foams excessively reduce beverage temperature - turn
the thermostat knob to the right,
Speed fiting leaking hose
incorrectly inserted pull out the hose, check that the end of the
hose is flat (not at an angle), level off with
a knife if needed
scratches on the hose pull out the hose and shorten by ca. 2 cm
NOTE: If the defect persists even after the above steps are taken, contact a service
centre.