CONTROL PANNEL BUTTONS
Reset Button
This button zeros the counter. The “stop at zero” feature uses this as the reference point
to turn the reel off.
WARNING:
Never push the reset button without first setting the
rig at least 20 feet below the top of the pole. Failure to do this could cause the
fishing rig to retrieve past the tip and the possible loss of gear and fish.
Manual Retrieve Buttons
Pushing either one of the “man” buttons turns the reel on as long as the button is held
down. Once the button is released the spool stops. This is used to advance the reel
manually. This is especially useful after using the “stop at zero” feature to slowly bring
the gear to the boat. It can also be used to retrieve the rig if the “stop at zero” feature is
not used or the reset button is accidentally pushed.
Stop at Zero
is activated by pushing both of the man buttons together for at least two
seconds. This is one of the handiest features of the S-1200 as it makes for truly “hands
free” retrieval. WARNING: Once the “stop at zero” feature is activated it runs the reel
until the counter hits 0000. IMPORTANT: If at any point the reel needs to be stopped
push either of the red “man” buttons. The “stop at zero” can be continued by pushing
both “man” buttons again at the same time for two seconds and the reel will continue to
0000.
