16
*musicbook 25 only
Settings
musicbook
⠸
20/25
•
Settings
The Settings menu of the musicbook 20/25 can be
opened by pressing the Settings button on the IR
remote control.
• The following appears on the display.
In this Settings menu, you can change the settings for
Balance, Display, Digiout,
Fixed Line Out
, and
Factory Default
.
Balance
The balance function is used to regulate volume differences at the listening position
if this position is not in the optimal location for sound. For this purpose, different
volume levels can be set for the left and right loudspeakers.
• Press the Settings button on the IR remote control.
• Use the SET buttons SET up and SET down to select
Balance.
• Confirm with the OK button.
• Use the SET buttons SET up and SET down to select
the desired range for the left or right loudspeaker.
Confirm with the OK button.
Display
In the Settings menu, you have two display brightness levels to choose from.
• Press the Settings button on the IR remote control.
• Select
u
Display
t
with the SET buttons SET up and
SET down.
• Confirm with the OK button.
• Use the SET buttons SET up and SET down to select
u
High
t
for high brightness and
u
Low
t
for low
brightness. Confirm with the OK button.
Digiout
To reduce interference sources, the two digital outputs (optical and coaxial) are
switched off in the factory. They can be turned on and off again in the Settings menu.
• Press the Settings button on the IR remote control.
• Use the SET buttons SET up and SET down to select
u
Digiout
t
.
• Confirm with the OK button.
• Use the SET buttons SET up and SET down to select
u
On
t
to turn on the digital outputs and
u
Off
t
to turn off the digital outputs. Confirm with the OK
button.
