background image

                                                           

855

 

Dual Mono Power Amplifier

 

 

 

 

Dear Music Lover, 

 
 

Congratulations on becoming the owner of the Lindemann 855 power amplifier. 
This is an exclusive high-end audio component, built in Germany in limited 
quantities.   
 
Our team designed this amplifier to the highest standards so that you could 
enjoy the highest level of audio reproduction. Because we use only the finest 
components and the most modern production technologies, we confidently 
guarantee that our products will retain their superb qualities for many years.  
 
Keep the carton and packaging materials that your 855 came in. They will protect 
your amplifier should you need to transport it in the future. Transporting the 855 
in anything other than the original packaging may result in physical damage not 
covered by your warranty.  
 
A final note -- please take the time to read this Owner's Manual before using the 
equipment for the first time. It contains a number of useful tips gathered from 
our many years of experience, which will help you get the most from your hi-fi 
system. 

 

 

Copyright and trade mark acknowledgements 

 
 

HiDRA, Lindemann audiotechnik, Lindemann high fidelity excellence and the 
Lindemann logo are registered trade marks of Lindemann audiotechnik GmbH. 
Lindemann audiotechnik GmbH disclaims any proprietary interest in trade 
marks and trade names other than its own. 

 
 

The information in this manual is furnished for information use only, is subject to 
change without notice, and should not be construed as a commitment by 
Lindemann audiotechnik GmbH. Lindemann audiotechnik GmbH assumes no 
responsibility or liability for any errors or inaccuracies that may appear in this 
manual. 

 
 

Copyright and Acknowledgements 

Copyright © 2007 Lindemann audiotechnik GmbH. All rights reserved.  
No part of this publication may be reproduced, stored in a retrieval system, or 
transmitted, in any form or by any means, electronic, mechanical, photocopying, 
recording, or otherwise, without the prior written permission of the publisher. 

Содержание 852
















Отзывы: