Linde G-TECTA4GP, Руководство по эксплуатации, Страница: 5 / 24

5
Key Features
G-TECTA
®
4GP has been designed to be a reliable
and robust personal monitoring system, whilst being
compact, light and easy to use. The instrument is
water and dust tight to IP65 rating. The G-TECTA
®
4GP’s shape and design ensures high levels of user
comfort and minimal interference with the user’s
normal work function. The non-slip grip and lockable
attachment clip ensure secure handling and wear
ability and additional accessories such as shoulder
straps and chest harness allow flexible wearing options
if desired.
The G-TECTA
®
4GP has a single mode button and
a high quality display with automatic backlight. The
instrument continuously monitors the gas level in
the environment providing current, peak, and time
weighted average (TWA) readings for the user.
The G-TECTA
®
4GP can be configured by utilising Linde
G-TECTA
®
PC software. Data and event logging can
also be downloaded and managed through a fast and
reliable optical communication link.
Software
The instrument software has been written in
accordance with IEC 61508 to ensure quality and
integrity in operation. The internal circuitry monitors
for any malfunction and will display an error warning
to the user in the unlikely event they occur.
Batteries
The G-TECTA
®
4GP Portable Multi-Gas Detector
has two battery options: Li-ion rechargeable or non-
rechargeable batteries.
Rechargeable Batteries
G-TECTA
®
4GP uses a Li-ion battery pack and should
arrive with sufficient charge so that the unit can be
used straight out the box. However, to attain the full
operating time you should charge the battery. (The
actual operating time will depend on the types of
sensor installed.) The G-TECTA
®
4GP with pump is
designed to operate for at least 12 hours on a fully
charged battery.
WARNING
 Only recharge the battery in a safe
(non-hazardous) area and with a Linde G-TECTA
®
4GP
charger. Failure to comply could invalidate safety
certification and may result in permanent damage
to the instrument.
Non-rechargeable Batteries
G-TECTA
®
4GP uses a three AA (LR6) alkaline battery
pack and is designed to operate for 11 hours using
new batteries.
WARNING
 G-TECTA
®
4GP uses AA (LR6) batteries.
To maintain compliance with instrument certification,
ensure only the following battery types are used: GP
(15A), Energiser, Duracell and Varta (4006).Non-
rechargeable Batteries
G-TECTA
®
4GP uses a three AA (LR6) alkaline battery
pack and is designed to operate for 11 hours using
new batteries.
WARNING
 G-TECTA
®
4GP uses AA (LR6) batteries.
To maintain compliance with instrument certification,
ensure only the following battery types are used: GP
(15A), Energiser, Duracell and Varta (4006).