Linda Lewis LLKPM10, Инструкция по эксплуатации

Страница: 4 / 6

- 4 -
Operating Instructions
1. The machine must be placed on a dry, level surface to ensure
the mixer is stable.
2. Check the power voltage of the socket matches the mixer’s
required voltage and ensure it is properly earthed before
plugging in the mixer.
3. Slide the guard across and pour the ingredients into the bowl.
4. Close the guard and set the stirring speed.
5. Switch on the mixer using slow speed at first, then switch to
fast speed to ensure uniform dough is produced.
6. If the machine is stopped during the mixing process, be sure
to return to the lowest speed when starting the machine up
again.
Maintenance
Cleaning
Spilled food should be removed immediately from all exterior
surfaces. Also, it is important to clean the mixer after use. To
remove dirt or marks from the mixer, it is best to wipe with a soft
damp cloth. The stainless steel is washable. The mixer must not be
cleaned using a high-pressure jet.
Problems and Solutions
1. The mixer will not start – the power is not properly connected
or the guard is not fitted correctly
2. The guard switch is not operating correctly – open the guard
and check to see if the micro-switch is connected properly.
Check the power supply.
3. The mixer has overheated – this can occur if the mixer is
operated for too long, with excessive load. Overheating can
also come from electric leakage.
4. The mixer is operating with low efficiency – check to see if the
drive system is worn, whether the motor is in good condition,
whether the belt is loose or damaged. Remove the top cover
and the rear ventilating plate, adjust the belt, tighten the
wheel or the chains, thus the belt and the chains can be re-
tightened.