Lincoln CORSAIR 2023, Руководство пользователя

Страница: 440 / 690

1. Loosen the clamp. See Maintenance
Videos (page 450).
2. Disconnect the connector.
3. Release the two clips securing the airbox
cover to the housing.
4. Lift up on the airbox cover.
5. Remove the air filter element from the
housing.
6. Wipe any dirt or debris from the housing.
Note: Do not allow dirt or debris to enter the
air filter housing and make sure you have a
good seal.
7. Install the new air filter element.
Note: Be careful not to crimp the air filter
element edges between the housing and
cover. This can cause filter damage and
allow unfiltered air to enter the engine if not
properly seated.
8. Install the airbox cover back into the
housing. Make sure that all four cover
fingers are seated in their corresponding
housing windows. Press down with your
right hand on the flexible tube, while
pulling back on the housing bracket with
your left hand.
9. Reverse Steps 3, 2 and 1. Make sure the
clamp joint is fully seated.
CHANGING THE ENGINE AIR FILTER -
PLUG-IN HYBRID ELECTRIC VEHICLE
(PHEV)
WARNING: To reduce the risk of
vehicle damage and personal burn injuries,
do not start your engine with the air
cleaner removed and do not remove it
while the engine is running.
When changing the air filter element, use
only parts that meet or exceed our
specifications.
Change the air filter element at the proper
interval. See Maintenance (page 426).
Note: If you do not use the correct air filter
element, your vehicle warranty could be
void.
E299071
1. Using a screwdriver, loosen the clamp
on air filter housing cover.
2. Gently pull the boot back away from the
air filter housing cover.
3. Release the two clips from the air filter
housing cover.
4. Remove air filter housing cover.
5. Remove the air filter element from the air
filter housing.
436
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM
Maintenance