Lincoln Centro-Matic P653S, Руководство пользователя

Страница: 22 / 48

Page Number - 22
Form 404372
Electric Operated Centro-Matic Pump P653S
Programming Mode, continued
Display Press
P6: Upon applying power to the pump you can program
whether it starts with a pause time SP or starts with a lube
cycle SO.
Press button, so that “P6“ appears in the display.
The currently set values appear as to whether the cycle is to
start with the pause time or the lubricating time.
The default setting for the pump is set to start with a pause
time SP (Start Pause time) .
Press button.
Each time the pump is switched on, it will start with the lu-
bricating time SO (Start Operation ). After the first lubricating
time the preset pause time will be valid.
Step 6
Step 7
Completing the programming
Press button. “P -” is displayed.
IMPORTANT
Always carry out the programming com-
pletely in order to save the new values.
• Press this key (additional lubrication) to complete the pro-
gramming and to save the entered parameters.
NOTE
If the button “additional lubrication” is not
pressed within 30 seconds, the changed
parameters will not be saved and the
previous programming remains valid.
IMPORTANT
After completion of the programming,
check the parameter settings in the oper-
ating mode once again.
Programming of the pump with pressure switch is complete.
████████████████████████████████████████████████████████████████████████████████████████████