Lincoln 2016 MKT Скачать руководство пользователя страница 8

 

 

*Torque specifications are for nut and bolt threads free of dirt and rust. Retighten the lug 

nuts to the specified torque as soon as possible and no more than 100 miles (160 

kilometers) after changing a flat tire. 

 

WARNING

Failure to follow these precautions could cause the wheel nuts to loosen 

and the tire to fall off, resulting in death or serious injury

 
• Never use oil or grease on the wheel bolts or wheel nuts. Oil and grease may cause the 
wheel nuts to be excessively tightened, leading to bolt or disc wheel damage. In addition, 
the oil or grease can cause the wheel nuts to loosen and the wheel may fall off, causing a 
serious accident. Remove any oil or grease from the wheel bolts or wheel nuts. 
• When installing a tire, only use wheel nuts that have been specifically designed for that 
wheel. 
•Check for any cracks or deformations in the bolt screws, nut threads or bolt holes 

of the wheel. 
• Never install a wheel with excessive rust. Light surface rust should be cleaned off of 
the wheel and mounting surface. 
• Never install a tire with excessive tread wear. 

 
 
FUEL SERVICE: 
 
 

 

 

Locate the portable funnel that comes with the vehicle. The fuel filler funnel is located in 
the spare wheel storage tray. Carefully insert the funnel into the capless fuel system to 
add fuel. 
 

Note:

 Lincoln recommends adding a minimum of 1.3 gal of fuel to restart the engine. If 

the vehicle is out of fuel and on a steep slope, more fuel may be required. 

 

 

Содержание 2016 MKT













Отзывы: