2 01 5 M K Z
4
5
3
Service Engine Soon Light
Lights briefly when you switch on the
ignition. If it remains on or is blinking after you
start the engine, the On-Board Diagnostics
(OBD-II) system has detected a problem. Drive in
a moderate fashion and contact your authorized
dealer as soon as possible.
4
Power Tilt and Telescoping
Steering Column
*
Your power tilt steering column has a 4-way
rocker control that allows you to adjust the
steering wheel to your desired position.
5
Steering Wheel Controls
Press
VOL +
or
–
to increase or decrease volume
levels. Press
SEEK
to access the next or
previous radio station preset, CD track or preset
satellite radio channel*.
Press
to access SYNC® phone features.
Press
to access voice recognition.
6
Right Vehicle Information Display
Displays
information about Entertainment, Phone,
Climate and Navigation*. Use the right, 5-way
control located on your steering wheel to scroll
through, highlight and make minor adjustments
within a selected menu. Refer to the
MyLincoln
Touch
TM
chapter in your
Owner’s Manual
for
more information.
7
Push Button Start
Allows you to start your vehicle by pressing
the
ENGINE START STOP
control when fully
pressing down on the brake pedal. If your
vehicle has been idling for an extended period
of time, it automatically shuts down. Before
the engine shuts down, a message appears in
the information display, allowing the driver to
override the shutdown feature. Press the control
again to switch off the engine.
Note:
Your intelligent access transmitter must be
inside the vehicle for the ignition to start. Keyless
warning alert sounds the horn twice when
you exit the vehicle with the intelligent access
transmitter and the keyless vehicle is in RUN,
indicating the vehicle is still on.
8
Push Button Shift Transmission
Your vehicle includes an electronic transmission.
The shift controls are on the center stack next to
the MyLincoln Touch system.
Putting Your Vehicle in Gear
A.
Fully press down the brake pedal.
B.
Press and release one of the
PRNDS
controls
to select your gear.
C.
The selected gearshift control lights and the
information display shows a telltale of the
selected gear.
D.
Release the brake pedal and your
transmission remains in the selected gear.
Note:
When entering an automatic car wash,
always
put your vehicle into
Stay in Neutral
mode. To put your vehicle in
Stay in Neutral
mode, make sure your vehicle is stationary first,
and then:
A.
Press the neutral (N) control on the shifter
assembly once. The information display
screen reads
“
Press N to enter Stay in
Neutral mode”
.
B.
Press neutral (N) on the shifter assembly
again. The message
“Stay in Neutral
mode engaged”
appears in the information
display and the neutral (N) control flashes
continuously to confirm your selection.
To exit
Stay in Neutral
mode, press another gear.
Instrument Panel
1
Left Vehicle Information Display
Provides information about various systems
on your vehicle. Use the left, 5-way control
located on the steering wheel to choose and
confirm settings and messages. Refer to the
Information Displays
chapter in your
Owner’s Manual
for more information.
2
Adaptive Cruise Control
*
Your MKZ includes cruise control or adaptive
cruise control. Adaptive cruise control
automatically adjusts your speed to maintain
a set distance between your vehicle and the
vehicle in front of you in the same lane. You can
set the gap distance between your vehicle and
the vehicle in front of you by pressing the and
controls on the steering wheel.
Note:
Driving aids do not replace the need to
watch where the vehicle is moving and brake
where necessary. Refer to the
Cruise Control
chapter of your
Owner’s Manual
for safety
information, more details and limitations.
*if equipped
*if equipped
